Wds Mode - Encore N300 User Manual

5.1.1.3 WDS Mode

In WDS (Wireless Distribution System) mode, the Extender connects one or more access
points by their MAC address. When a wireless client belonging to one access point moves
out of its access point range, the wireless client automatically connects to the other access
point within the WDS. Its wireless network signal continues without interruption.
Channel — Select a transmision channel for wireless communications. The channel of
any wireless client must match the channel selected here to access the network via the
Extender.
WDS Security — Select Enable to prompt users to enter a security key before allowing
access to the wireless network.
WDS Auth Type — Select the type of security to use: WEP or WPA2.
WEP
A.
With WEP (Wired Equivalent Privacy), wireless clients must enter the same key to connect
to the wireless network.
24
www.encore-usa.com