Advanced - Encore N300 User Manual

5.1.2 Advanced

The Advanced screen allows users to configure advanced wireless functions. This screen
is intended for advanced users. It is recommended to retain the default settings if you are
unsure about them.
Beacon Interval — Enter a beacon interval time between 20 to 1000. The default value is
100. The beacon interval is the frequency interval of sending beacon packets by the
access point to synchronize the wireless network.
RTS Threshold — Enter an RTS (Request-To-Send) threshold value. This value stabilizes
data flow. If data flow is irregular, only slight modifications should be made.
Fragmentation Threshold — Enter a fragmentation threshold value. If packet transfer
error rates are high, choose values between 1500 and 2346 until packet transfer rates are
minimized.
Note: Setting the fragmentation threshold value too low may diminish system performance.
DTIM Interval — Enter a DTIM (Delivery Traffic Indication Message) interval.
32
www.encore-usa.com