Wireless; Basic - Encore N300 User Manual

5.1

Wireless

The Wireless menu allows users to set up the wireless network, select the Extender
operation mode, and use Wi-Fi Protected Setup (WPS).

5.1.1 Basic

The Basic screen allows users to select the operation mode, create an SSID, assign the
channel, and set the security settings.
The required parameters on this screen vary depending on the selected operation mode.
Operation Mode — Select an operation mode:

AP (Access Point): The Extender works as an access point for clients in the
wireless network. See

Repeater: The Extender repeats the signal from a wireless router for clients
outside the router range. See

WDS (Wireless Distribution System): The Extender connects two or more
access points. See

AP + WDS: The Extender acts as the access point to two or more access
points that are connected in a WDS. See
on page
AP Mode
Repeater Mode
WDS Mode
on page
18
www.encore-usa.com
.
19
on page .
22
.
24
on page
AP + WDS Mode
.
27