Sslsettings - D-Link NetDefend DFL-210 Cli Reference Manual

3.39.16. SSLSettings

RouteFailOver_IfacePollInterval
RouteFailOver_ARPPollInterval
RouteFailOver_PingPollInterval
RouteFailOver_GraceTime
RouteFailOver_ConsecFails
RouteFailOver_ConsecSuccess
Transp_CAMToL3CDestLearnin
g
Transp_DecrementTTL
Transp_CAMSize_Dynamic
Transp_CAMSize
Transp_L3CSize_Dynamic
Transp_L3CSize
Transp_RelaySTP
3.39.16. SSLSettings
Description
Settings related to SSL (Secure Sockets Layer).
Properties
SSL_ProcessingPriority
TLS_RSA_WITH_3DES_168_S
HA1
TLS_RSA_WITH_RC4_128_SH
A1
TLS_RSA_WITH_RC4_128_MD
5
Note
This object type does not have am identifier and is identified by the name of the type
only. There can only be one instance of this type.
Time (ms) between polling of interface failure. (Default: 500)
Time (ms) between ARP-lookup of gateways. May be over-
ridden for each route. (Default: 1000)
Time (ms) between PING'ing of gateways. (Default: 1000)
Time (s) between startup/reconfigure and monitoring start.
(Default: 30)
Number of consecutive failures before route is marked as un-
available. (Default: 5)
Number of consecutive success before route is marked as
available. (Default: 5)
Do L3 Cache learning based on destination IPs and MACs in
combination with CAM table contents. (Default: Yes)
Decrement TTL on packets forwarded between transparent
interfaces. (Default: No)
Allocate the CAM Size value dynamically. (Default: Yes)
Maximum number of entries in each CAM table. (Default:
8192)
Allocate the L3 Cache Size value dynamically. (Default: Yes)
Maximum number of entries in each Layer 3 Cache. (Default:
8192)
Relay Spanning-Tree (STP, RSTP and MSTP) Bridge Pro-
tocol Data Units to all switch interfaces. (Default: Drop)
The amount of of CPU time that SSL processing is allowed to
use. (Default: Normal)
Enable cipher RSA_WITH_3DES_168_SHA1. (Default:
Yes)
Enable cipher RSA_WITH_RC4_128_SHA1. (Default: Yes)
Enable cipher TLS_RSA_WITH_RC4_128_MD5. (Default:
Yes)
134
Chapter 3. Configuration Reference