Table of Contents
Advertisement
The extended menu
Setting transmission frequencies and frequency banks – "Tune"
When you have selected one of the system banks and then select the
"Tune" menu, the bodypack transmitter automatically switches to
channel 1 of the frequency bank "U". In this case, "U.1" briefly appears on
the display panel. Upon delivery, the channels of the frequency bank "U"
are not assigned a transmission frequency.
When you are in the "Tune" menu item, the RF signal is deactivated.
Via the "Tune" menu item, you can set a transmission frequency to be
stored in the current channel
frequency bank "U" and assign it a transmission frequency. It is vital to
observe the notes on frequency selection on page 22.
Setting a transmission frequency for the current channel
Press the rocker button until the "Tune" menu item appears.
Press the
SET
The frequency selection appears.
Advanced Menu
Tune
543.200 MHz
Call up "Tune"
Set the desired frequency.
Press the
SET
Your settings are stored.
You are back to the operating menu.
Selecting a channel and assigning this channel a frequency
Press the rocker button until the "Tune" menu item appears.
Press the
SET
appears.
Advanced Menu
Tune
543.200 MHz
Call up "Tune"
(special function)
Set the desired channel.
Press the
SET
The frequency selection appears.
Set the desired frequency.
Adjusting settings via the operating menu
"Advanced
or
you can select a different channel in the
SET
button.
SET
Tu n e
543
.200 MHz
B.Ch: 20.1
Select the MHz
value and confirm
"Stored"
SET
button.
SET
button until the frequency bank selection
SET
Tu n e
B.Ch:
U.
Select the
channel;
store the setting
SET
"Stored"
SET
button.
Menu"
SET
Tu n e
544.200
Select the kHz value;
store the setting
1
MHz
B.Ch: 20.1
SET
19
Advertisement
Table of Contents
