The Extended Menu "Advanced Menu - Sennheiser SK 300 G3 Instruction Manual

Adjusting settings via the operating menu
The name can be displayed on the standard displays
"Frequency/Name" and
The name can consist of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Press the rocker button to select a character.
Press the
segment/character or to store the complete
entry.
Activating/deactivating the automatic lock mode –
"Auto Lock"
Menu
Auto Lock
Active
Call up "Auto
Lock"
The lock mode prevents that the bodypack transmitter is
accidentally switched off or programed during operation.
The lock mode icon
indicates that the lock mode is activated.
Press the rocker button to select the desired
setting.
For information on how to use the lock mode, refer to
page 12.
The extended menu
Setting transmission frequencies and frequency banks –
"Tune"
When you have selected one of the system banks
and then select the "Tune" menu, the bodypack
transmitter automatically switches to channel 1 of
the frequency bank "U1". In this case, "U1.1" briefly
appears on the display panel.
Upon delivery, the channels of the frequency banks
"U1" to "U6" are not assigned a transmission
frequency.
When you are in the "Tune" menu item, the
RF signal is deactivated.
Via the "Tune" menu item, you can set a transmission
frequency to be stored in the current channel
select a different channel in one of the frequency banks
"U1" to "U6" and assign this channel a transmission
frequency.
22
"Name/Frequency
SET button to change to the next
Auto Lock
Active
Select the desired
setting
"Stored"
on the current standard display
"Advanced
bank/Channel".
Auto Lock
Inactive
Store the setting
Menu"
or you can