Using the bodypack transmitter
To
activate
the
RF
Briefly press the
ON/OFF
"RF Mute
Press the
SET
The transmission icon
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the
Lock" menu item (see page 18). If the lock mode is activated, you have to
temporarily deactivate it In order to be able to operate the bodypack
transmitter:
Press the rocker button.
"Unlock?" appears on the display panel.
Press the
SET
The lock mode is temporarily deactivated:
When you are in the operating menu
The lock mode is deactivated as long as you are in the
operating menu.
When one of the standard displays is shown
The lock mode is automatically activated after 10 seconds.
Prior to this, the lock mode icon
being activated.
MHz
543.200
ew100 G3
P
MUTE
AF
Muting the audio signal
or deactivating the RF signal
The
MUTE
switch
the RF signal. Via the
function of the
MUTE
Setting
Slide the MUTE switch
"AF
On/Off"
... to the left (position MUTE) Mutes the audio signal
... to the right
"RF
On/Off"
... to the left (position MUTE) Deactivates the RF signal
... to the right
"Disabled"
... to the left (position MUTE) None
From the
"Mute
(see page 20).
Exit the operating menu.
Slide the
MUTE
The bodypack transmitter reacts as indicated in the table.
12
signal:
ON/OFF
Off" appears on the display panel.
SET
button.
SET
button.
flashes, indicating that the lock mode is
allows you to mute the audio signal or to deactivate
"Mute
Mode" menu item, you can set the desired
switch
(see page 20):
Mode" menu item, select the desired setting
switch
to the left, to the position MUTE.
button.
is displayed again.
...
Function
Unmutes the audio signal
(offline operation)
Activates the RF signal
(online operation)
"Auto