Table of Contents
Advertisement
Adjusting settings via the operating menu
Selecting the frequency bank and the channel manually –
"Frequency Preset"
Menu
Frequency Preset
B.Ch: 5.12
Call up
"Frequency Preset"
When you are in the
deactivated.
Overview of the frequency banks and channels:
Frequency bank
"1" to "20"
"U"
When setting up multi-channel systems, please observe the following:
Only the factory-preset frequencies within one frequency bank are inter-
modulation-free (see page 22). Bodypack transmitter and receiver of a
transmission link have to be set to the same frequency. It is vital to
observe the notes on frequency selection on page 22.
Entering a name – "Name"
Menu
Name
L i c h a e l
Call up "Name"
Via the "Name" menu, you can enter a freely selectable name (e.g. the
name of the performer) for the bodypack transmitter.
The name can be displayed on the standard displays "Frequency/Name"
and "Channel/Name". The name can consist of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Press the rocker button to select a character.
Press the
SET
character or to store the complete entry.
Activating/deactivating the automatic lock mode – "Auto Lock"
Menu
Auto Lock
A c t i v e
Call up
"Auto Lock"
The lock mode prevents that the bodypack transmitter is accidentally
switched off or programed during operation. The lock mode icon
the current standard display indicates that the lock mode is activated.
Press the rocker button to select the desired setting.
For information on how to use the lock mode, refer to page 12.
18
SET
Frequency Preset
B.Ch:
5.12
Select the frequency
bank and confirm
"Stored"
"Frequency
Preset" menu item, the RF signal is
Channels
up to 12 per
frequency bank
up to 12
SET
Name
L
i c h a e l
Enter a character
and confirm
"Stored"
SET
button to change to the next segment/
SET
Auto Lock
Active
Select the desired
setting
"Stored"
SET
Frequency Preset
B.Ch:
MHz
Select the channel;
store the setting
Type
System bank:
frequencies are factor-preset
User bank:
frequencies are freely selectable
SET
Enter a character;
store the setting
Store the setting
1.12
MHz
SET
Name
Michael
SET
Auto Lock
I n a c t i v e
SET
on
Advertisement
Table of Contents
