Working With The Operating Menu - Sennheiser sk100-g3 bodypak transmitter User Manual

Display
LCD Contrast
Reset
Software Revision
Exit

Working with the operating menu

If the lock mode is activated, you have to deactivate it In order to
be able to work with the operating menu (see page 11).
By way of example of the "Sensitivity" menu, this section describes how to
use the operating menu.
Changing from the current standard display to the operating
menu
Press the
SET
The current standard display is replaced by the main menu.
The last selected menu item is displayed.
Selecting a menu item
Press the rocker button to change to the "Sensitivity" menu
item.
The current setting of the selected menu item is displayed:
Menu
Sensitivity
Changing and storing settings
Menu
S e n s i t i v i t y
–12 dB
Call up
"Sensitivity"
Press the
SET
Press the rocker button to adjust the input sensitivity.
Press the
SET
The rocker button features a "fast search" function:
Rocker button
Press the UP button
Press the DOWN button
Hold the button pressed
Canceling an entry
Press the
ON/OFF
The current standard display appears on the display panel.
To return to the last edited menu item:
Press the
SET
menu item appears.
Function of the menu item
Adjusts the contrast of the display panel
(see page 20)
Resets the bodypack transmitter
(see page 21)
Displays the current software revision
(see page 21)
Exits the extended menu
returns to the main menu
SET button.
–12 dB
SET
S e n s i t i v i t y
– 12 dB
Select the desired
setting
"Stored"
SET button to call up the menu item.
SET button to store the setting.
Display
jumps to the previous menu item/setting
jumps to the next menu item/setting
cycles continuously
ON/OFF button to cancel the entry.
SET button so many times until the last edited
Using the operating menu
"Advanced Menu" and
S e n s i t i v i t y
–36
Store the setting
dB
SET
15