Deactivating The Lock Mode Temporarily - Sennheiser SK 2000 Instruction Manual

Using the bodypack transmitter
Press the UP/DOWN button
"RF Mute
SET
Press the
The transmission frequency is displayed but the bodypack
transmitter does not transmit an RF signal. The transmission
icon is not displayed. When the pilot tone function is
activated on both bodypack transmitter and receiver,
"RF Mute" (backlit in red) appears alternately with the stan-
dard display on the receiver's display panel.
543.200
**2000**
P
MUTE
AF
Use this function to save battery power or to prepare a bodypack
transmitter for use during live operation without causing inter-
ference to existing transmission links.
To activate the RF signal:
Press the
ON/OFF
"RF Mute
Press the UP/DOWN button
"RF Mute
SET Press the
The RF signal is activated and the transmission icon
played again.
To switch the bodypack transmitter off:
If necessary, deactivate the lock mode (see next chapter).
Keep the
ON/OFF
the display panel. The red
panel turns off.
When in the operating menu, pressing the
cancel your entry (ESC function) and return you to the current
standard display.

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the
Lock" menu item. If the lock mode is activated, you have to temporarily
deactivate it in order to be able to operate the bodypack transmitter:
12
On?" appears on the display panel.
SET button.
MHz
ON/OFF button.
On?" appears on the display panel.
Off?" appears on the display panel.
SET button.
ON/OFF button pressed until "OFF" appears on
ON LED
/ .
/ .
¿
goes off and the display
ON/OFF button
is dis-
will
"Auto