Resetting To Factory Defaults; System Diagnostics - SonicWALL CDP 6.0 Administrator's Manual

Resetting to Factory Defaults

You can reset the SonicWALL CDP appliance to factory default settings on the Device Reset
tab on the System > Administration page. Resetting the appliance to factory default settings will
remove all data, as well as all configuration settings and will reboot the appliance. After a device
reset, you must use the default credentials, admin/password, to login.
To reset the appliance to factory defaults:
Navigate to the System > Administration page and click the Device Reset tab.
Step 1
Click Reset Device.
Step 2
In the confirmation page, click Yes to reset the appliance to factory defaults.
Step 3

System Diagnostics

The Web management interface provides five diagnostics displays for the SonicWALL CDP
appliance on the System > Diagnostics page:
•
•
•
•
CPU information, including vendor ID, model, cache size, MHz, and many characteristics
Memory usage, including free memory, buffers in use, cached, active, inactive, swap
usage, mapped pages, and other data
Network information, including link status, packet count, and other data for eth0 and eth1,
and also displays active Internet connections with local and foreign addresses, and
information about active UNIX domain sockets
System processes, including user ID, process ID, PPID, time, command, and other data
SonicWALL CDP 6.0 Administrator's Guide
System Diagnostics
59