Using Bare Metal Recovery - SonicWALL CDP 6.0 Administrator's Manual

Using Bare Metal Recovery

Using Bare Metal Recovery
To use Bare Metal Recovery with the SonicWALL CDP appliance, you will need a user account
on the appliance with the desired quota. Then you can launch the BMR application and save
the image to the SonicWALL CDP appliance.
To use Bare Metal Recovery to save an image on the SonicWALL CDP appliance, perform the
following steps:
Create a user account on the SonicWALL CDP appliance, with the desired quota.
Step 1
Launch the BMR application and select the local drive or location that you want to back up.
Step 2
When the backup wizard prompts you for the destination at which to save the image, select FTP
Step 3
Connections and browse for the server, which can be the SonicWALL CDP appliance.
If the server is not listed, you can type in a path in the form: 
ftp://<CDP IP Address>/upload/image.tib
where image.tib can be any file name with a .tib extension.
When prompted for credentials, enter the credentials you created in step 1.
Step 4
The BMR application performs the backup.
102 SonicWALL CDP 6.0 Administrator's Guide