Testing Network Connectivity
The test results column will display the results of the network connection test.
Step 4
•
•
Tracing Network Routes
You can type in a URL on the Trace Route tab to find out the network route that traffic from the
SonicWALL CDP appliance takes to reach that location.
To trace the route to a particular URL, perform the following steps:
Navigate to Network > Connectivity and click on the Trace Route tab.
Step 1
In the text box near the top of the page, type in an IP address or a URL in the form of
Step 2
"mysonicwall.com".
68
SonicWALL CDP 6.0 Administrator's Guide
If the test was successful, Ping succeeded is visible.
If the network connection test failed, Ping failed is visible.