Specifying Alerts - SonicWALL CDP 6.0 Administrator's Manual

Configuring the System Settings
If you did not receive your test email, verify that you have provided the correct credentials,
Note
that you have Internet connectivity, and that the mail server you specified is available. Failed
emails will be stored and sent when a mail server connection is established.

Specifying Alerts

The Alerts tab in the System > Settings page allows you to specify the type of alerts to receive.
System Settings Alerts Options
Select the checkboxes to receive any of the following alerts:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
46 SonicWALL CDP 6.0 Administrator's Guide
Local storage near full – The local CDP appliance is nearly full.
Local storage full – The local CDP appliance is completely full.
Offsite near full – The offsite CDP appliance is nearly full.
Offsite full – The offsite CDP appliance is completely full.
Connection to offsite failed – The local CDP appliance cannot connect to the offsite unit.
Agent near quota – The agent has nearly reached its data backup quota on the CDP.
Agent reached quota – The agent has reached its data backup quota on the CDP.
Agent's authentication reset – The agent credentials have changed.
Agent created – A new agent has connected to the CDP.
Agent removed – An agent has disconnected from the CDP.
Agent renamed – An agent has been renamed.
Admin password reset – The CDP admin account password has been changed.
Local archive backup failed – A local archive backup has failed.
Local archive backup completed – A local archive backup has completed successfully.
RAID degraded – A hard drive in the RAID array has a problem or has been removed.
Policy invalid – An invalid policy has been configured or applied.