Adding A Bare Metal Recovery Account; Editing A Bare Metal Recovery Account - SonicWALL CDP 6.0 Administrator's Manual

Adding a Bare Metal Recovery Account

To add an account that can be used to access the SonicWALL CDP appliance (as an FTP
server) directly from the BMR tool, perform the following steps:
In the Web Management Interface, navigate to the BMR > Accounts page.
Step 1
Click the Add button to open the BMR Accounts dialog box.
Step 2
Type the account username into the username field.
Step 3
Type the password for the account into the password field.
Step 4
Enter the number of megabytes that this account can use on the SonicWALL CDP appliance
Step 5
into the quota field.
Click Save.
Step 6
To exit the dialog box without saving, click Close.

Editing a Bare Metal Recovery Account

To edit an existing account, perform the following steps:
In the Web Management Interface, navigate to the BMR > Accounts page.
Step 1
Click the Edit Entry icon in the Configure column for the account you want to edit. The BMR
Step 2
Accounts dialog box opens.
Make the desired changes in the quota, username, or password fields.
Step 3
Click Save.
Step 4
To exit the dialog box without saving, click Close.
Configuring Bare Metal Recovery Accounts
SonicWALL CDP 6.0 Administrator's Guide 101