Hitron 50201270 Instruction Manual page 19

BLC MODE
AREA
LEVEL
WDR MODE
LEVEL
5.2.5 ALARM/MD/FD
MODE
AREA SEL
DEFAULT
ADJ TOP/LEFT
ADJ BOT/RIGHT
SENSITIVITY
DWELL TIME
PRESET SEL
NOTE1 : The result of face detection can be inaccuracy
5.2.6 PRIVACY
MASK SEL
DEFAULT
ADJ TOP/LEFT
ADJ BOT/RIGHT
COLOR
MOSAIC
MOSAIC TYPE
NOTE1 : The mosaic when the color is transparent, is possible
Select backlight compensation mode.
(OFF/AUTO/MANUAL)
Select BLC area position.(1~9)
Select BLC level.(HIGH/MID/LOW)
Wide dynamic range on/off.
Adjust WDR level.(1~100)
<ALARM/MD/FD MENU>
MODE
AREA SEL
DEFAULT
ADJ TOP/LEFT
ADJ BOT/RIGHT
SENSITIVITY
DWELL TIME
PRESET SEL
END
Select alarm and MD/FD mode.
(OFF/MD/EXT/FD/MD+EXT/FD+EXT)
Select MD area number. (1~4)
Select MD/FD enable/disable.
Set MD area as default.
Adjust the location of the MD area with boundary top and left.
Adjust the location of the MD area with boundary bottom and right.
Adjust sensitivity of MD/FD area. (MD:1~10 / FD:1~64)
Dwell time setup of zoom preset. (10,20,...,180sec)
Select zoom preset number.(0FF,1~10)
(When the MD and/or Alarm is/are occurred.)
<PRIVACY MENU>
MASK SEL
DEFAULT
ADJ TOP/LEFT
ADJ BOT/RIGHT
COLOR
MOSAIC
MOSAIC TYPE
END
Select mask area number.(1~16)
Select mask enable/disable.
Set mask area as default.
Adjust the location of the mask area with boundary top and left.
Adjust the location of the mask area with boundary bottom and right.
Select mask color.(1~8)
Mosaic display on/off.
Mosaic roughness setting. (1 ~ 4)
- - -
- - -
12