Storm Control - Dell Networking N4000 Series Configuration Manual

Storm Control

Use the Storm Control page to enable and configure the storm control
feature.
To display the Storm Control interface, click Switching → Ports → Storm
Control in the navigation menu.
Figure 24-2. Storm Control
Configuring Storm Control Settings on Multiple Ports
To configure storm control on multiple ports:
1 Open the Storm Control page.
2 Click Show All to display the Storm Control Settings Table.
3 In the Ports list, select the check box in the Edit column for the port to
configure.
4 Select the desired storm control settings.
792
Configuring Port-Based Traffic Control