Dell Networking N4000 Series Configuration Manual page 382

Figure 14-9. Image Path
3 View information about the current image.
console#show version
Image Descriptions
image1 :default image
image2 :
Images currently available on Flash
------- ------------ ------------ --------------- --------------
unit image1
------- ------------ ------------ --------------- --------------
1 4.1.0.7
4 Download the image to the switch. After you execute the copy command,
you must verify that you want to start the download.
The downloaded image replaces the currently inactive image, which may
be image1 or image2.Use either the active or backup keyword to have the
image to replace the specified image type (which takes effect only after a
reboot). In the following example, the active image is replaced.
console#copy
tftp://10.27.65.103/images/dell_0308.stk
imageactive
Mode........................................... TFTP
382
Managing Images and Files
image2 current-active next-active
5.0.0.8 image1 image1