Ospfv3 Trap Flags - Dell Networking N4000 Series Configuration Manual

Figure 13-16. OSPFv2 Trap Flags

OSPFv3 Trap Flags

The OSPFv3 Trap Flags page is used to specify which OSPFv3 traps you want
to enable or disable. When the condition identified by an active trap is
encountered by the switch, a trap message is sent to any enabled SNMP Trap
Receivers, and a message is written to the trap log.
To access the OSPFv3 Trap Flags page, click Statistics/RMON → Trap
Manager → OSPFv3 Trap Flags in the navigation panel.
342
Configuring SNMP