Configuring Ipv6 Neighbor Discovery - Dell Networking N4000 Series Configuration Manual

Configuring IPv6 Neighbor Discovery

Use the following commands to configure IPv6 Neighbor Discovery settings.
Command
ipv6 nd prefix
prefix/prefix-length
valid-lifetime
[{
preferred-
infinite} {
lifetime
| infinite}]
[no-autoconfig] [off-
link]
ipv6 nd ra-interval
maximum minimum
ipv6 nd ra-lifetime
seconds
ipv6 nd suppress-ra
ipv6 nd dad attempts
value
1258
Configuring IPv6 Routing
Purpose
Configure parameters associated with network prefixes that
the router advertises in its Neighbor Discovery
| advertisements.
• ipv6-prefix—IPv6 network prefix.
prefix-length
•
valid-lifetime
•
(Range: 0–4294967295 seconds.)
• infinite—Indicates lifetime value is infinite.
preferred-lifetime
•
seconds. (Range: 0–4294967295 seconds.)
• no-autoconfig—Do not use the prefix for auto
configuration.
• off-link—Do not use the prefix for onlink determination.
Set the transmission interval between router Neighbor
Discovery advertisements.
maximum
•
4–1800 seconds).
minimum
•
(0.75 * maximum) seconds).
Set the value that is placed in the Router Lifetime field of
the router Neighbor Discovery advertisements sent from the
interface.
seconds
The
between the value of the router advertisement transmission
interval and 9000 seconds. A value of zero means this router
is not to be used as the default router. (Range: 0-9000).
Suppress router advertisement transmission on an interface.
Set the number of duplicate address detection probes
transmitted while doing Neighbor Discovery.
The range for
—IPv6 network prefix length.
—Valid lifetime of the router in seconds.
—Preferred-lifetime of the router in
— The maximum interval duration (Range:
— The minimum interval duration (Range: 3 –
value must be zero, or it must be an integer
value
is 0–600.