Sntp Server - Dell Networking N4000 Series Configuration Manual

SNTP Server

Use the SNTP Server page to view and modify information about SNTP
servers, and to add new SNTP servers that the switch can use for time
synchronization. The switch can accept time information from both IPv4 and
IPv6 SNTP servers.
To display the SNTP Server page, click System → Time Synchronization →
SNTP Server in the navigation panel. If no servers have been configured, the
fields in the following image are not displayed.
Figure 12-12. SNTP Servers
Defining a New SNTP Server
To add an SNTP server:
1 Open the SNTP Servers page.
2 Click Add.
The Add SNTP Server page displays.
296
Managing General System Settings