Chapter 5 Management And Setting - Kyocera Mita mita KM-P4850w Operation Manual

CHAPTER 5 MANAGEMENT AND SETTING

G Settings accessible by manager
Setting
5. Auto shutoff This setting allows the selection of two modes of
operation that take effect when the printer has
not been used for a specific period of time:
shutoff mode, which automatically turns off the
printer (Page 2-6), or sleep mode, which
automatically places the printer in a sleep state
(Page 2-6). You may also choose "OFF" if you
will not be using the auto shutoff feature.
6. Timer set This item sets the time that elapses before auto
energy saver (Page 2-6) or auto shutoff
(Page 2-6) is activated.
If the printer is used frequently, it is
recommended that the time for auto shutoff be
longer. If the printer is not used for long periods
of time, it is recommended that the time be
shorter.
7. Fusing temp. The fixing temperature can be changed for each
media type. Set a higher temperature for thick
paper and a lower temperature for thin paper.
* For custom paper, a fixing temperature for the
paper material selected in "8. Custom paper"
can be selected.
8. Custom paper This setting allows the selection of a media type
for custom paper. The selection made here is
linked to the "7. Fusing temp." custom settings.
5-2
Description Selectable values
Shutoff mode/
Sleep mode/OFF
Auto energy saver time:
5 to 45 minutes in 5 minute
increments
Auto shutoff time:
15 to 120 minutes in 5 minute
increments
Plain:
145 °C, 155 °C, 165 °C
Vellum:
165 °C, 175 °C, 185 °C
Film:
150 °C, 160 °C, 170 °C
Custom:
The media type configured in
"8. Custom paper" and its
respective fixing temperatures.
Plain/Vellum/Film
Default Page
Sleep mode 5-7
15 minutes 5-8
90 minutes
155 °C
5-9
175 °C
150 °C
Vellum
165 °C
Vellum 5-9