Kyocera Mita mita KM-P4850w Operation Manual page 22

CHAPTER 3 GETTING READY FOR PRINTING
Press the N or M key to select "End" ["back"] and press the
13
Enter key.
Inch specifications
Set/manager:
End
Metric specifications
Set/manager:
back
14 Press the N or M key to select "End" and press the Enter
key.
Inch specifications
Menu:
End
Metric specifications
Menu:
End
G DHCP server setting
If you use a DHCP server to assign the IP address of this machine,
perform this procedure in order to enable the DHCP server.
1 Press the */Menu key.
Press the N or M key to select "3. Set/manager".
2
Inch specifications
Menu:
3.Set/manager
Metric specifications
Menu:
3.Set/manager
Press the Enter key.
3
4 Use the MNOP cursor keys to input the pin code (the
default setting is qQrR).
Inch specifications
Enter pin code.
_ _ _ _
Metric specifications
Enter pin code.
_ _ _ _
NOTE
The pin code may be changed (see "11. Mgr. code change" on
page 5-10).
3-4
Press the N or M key to select "2. Set printer".
5
Inch specifications
Set/manager:
2.Set printer
Metric specifications
Set/manager:
2.Set printer
6 Press the Enter key.
7 Press the N or M key to select "3. DHCP server".
Inch specifications
Set printer:
3.DHCP server
Metric specifications
Set printer:
3.DHCP server
8 Press the Enter key.
9 The selected item will flash. Press the N or M key to select
"ON".
Inch specifications
DHCP server:
Metric specifications
DHCP server:
10 Press the Enter key.
11 Press the N or M key to select "End" and then press the
Enter key.
Inch specifications
Set printer:
End
Metric specifications
Set printer:
End
Press the N or M key to select "End" ["back"] and press the
12
Enter key.
Inch specifications
Set/manager:
End
Metric specifications
Set/manager:
back
ON
ON