Installations/Connections - Panasonic WV-SW395 Installation Manual

Installations/Connections

Caution:
• FOR UL LISTED MODEL(S), ONLY CONNECT 24 V AC CLASS 2 POWER SUPPLY.
Before installation, prepare the following (PAL model only)
When mounting this camera, wall mount bracket WV-Q122 (option) is required. When mounting the camera on a bracket
that is locally proqured, the attachment pipe is required.
Refer to the installation guide of the bracket to be used for details on the installation procedures of the bracket and the
camera.
Important:
• When using these mount brackets, the hexagon screws (M6) that are accessory of the brackets cannot be used as
the mounting screws for this camera. Use the hexagon screws (M5) attached to the housing base.
• When mounting the camera, remove the 4 hexagon screws (M5), then the attachment pipe from the housing base.
Wall mount bracket WV-Q122
WV-SW395
Attachment pipe
WV-SW395
17