Installations/Connections - Panasonic WV-SW396A Installation Manual

Installations/Connections

Caution:
• ONLY CONNECT 24 V AC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/
UL/CSA 60950-1).
Before installation, prepare the following
When mounting this camera, wall mount bracket WV-Q122A (option) is required. When mounting the camera on a bracket
that is locally procured, the attachment pipe is required.
Refer to the installation guide of the bracket to be used for details on the installation procedures of the bracket and the
camera.
Important:
• When using these mount brackets, the hexagon screws (M6) that are accessory of the brackets cannot be used as
the mounting screws for this camera. Use the hexagon screws (M5) attached to the housing base.
• When mounting the camera, remove the 4 hexagon screws (M5), then the attachment pipe from the housing base.
Wall mount bracket WV-Q122A
18
Attachment pipe