Panasonic WV-SW395 Installation Manual page 26

When connecting to a network using a PoE+ hub
<Required cable>
LAN cable (category 5e or better, straight, STP*)
* PAL model only
Powered speaker (option)
Plug-in power type
microphone (option)
Powered speaker (option)
Plug-in power type
microphone (option)
Important:
• The video monitor is used for checking the adjustment of the angular field of view when installing the camera or when
servicing. It is not provided for recording/monitoring use.
• Depending on the monitor, some characters (camera title, preset ID, etc.) may not be displayed on the screen.
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX or better. (When supplying the power
to a hub or router, apply PoE+ (IEEE802.3at compliant).) It is impossible to supply the power to this product from a
PoE hub or router that is compliant with IEEE802.3af standard.
• Power supply is required for each network camera.
• When using 24 V AC, power supply from a PoE (or PoE+) hub or router is not required.
26
Video monitor
(for adjustment use only)
RJ-45 female connector
(cable integrated type)
Recommended total extended
cable length: 1 m {3.28 feet}
Hub, router
PoE+ (IEEE802.3at compliant) is applied when the power is supplied.
LAN cable (category 5e or
better, straight, STP*)
To the power supply
(24 V AC)
(when the ambient
temperature is
–40 °C {–40 °F})
LAN cable (category 5e or
better, straight, STP*)
RJ-45 female connector
(cable integrated type)
To the power supply
(24 V AC)
(when the ambient
temperature is
–40 °C {–40 °F})
LAN cable (category 5e or
better, straight, STP*)
PC
Video monitor
(for adjustment use only)