Cisco Small Business Pro SA 520W Administration Manual page 18

Getting Started
Getting Started with the Configuration Utility
STEP 2
STEP 3
STEP 4
Cisco SA 500 Series Security Appliances Administration Guide
Start a web browser, and enter the following address: 192.168.75.1
This address is the factory default LAN address of the security appliance. If you
change this setting in the LAN configuration, you will need to enter the new IP
address to connect to the Configuration Utility.
When the Security Alert appears, accept or install the certificate:
• Internet Explorer: Click Yes to proceed, or click View Certificate for details.
On the Certificate page, click Install the Certificate. Follow the instructions
in the Wizard to complete the installation.
• Firefox: Click the link to add an exception. Click the Add Exception button.
Click Get Certificate, and then click Confirm Security Exception.
• Safari: Click Continue to proceed, or click Show Certificate. On the
Certificate page, click Install the Certificate. Follow the instructions in the
Wizard to complete the installation.
Enter the default user name and password:
• Username: cisco
• Password: cisco
1
18