Verisign™ Identity Protection Configuration; Configuring Verisign Identity Protection - Cisco Small Business Pro SA 520W Administration Manual

Configuring VPN
VeriSign™ Identity Protection configuration
NOTE
VeriSign™ Identity Protection configuration
NOTE
STEP 1
STEP 2
Cisco SA 500 Series Security Appliances Administration Guide
1. The Change Password section is available only for users who belong to the local
data base.
2. The administrator can enable or disable certain features.
3. The user must ensure that Java, Java Script, Active-X controls are enabled or
allowed in the web browser settings.
Use this page to configure the optional VeriSign™ Identity Protection (VIP) two-
factor authentication to authenticate SSL VPN users, providing an enhanced level
of security.
For more information or to order the VeriSign Identity Protection service, go to:
www.cisco.com/go/viptoken

Configuring VeriSign Identity Protection

Click VPN on the menu bar, and then click VeriSign ID Protection > VIP
Configuration in the navigation tree.
The VIP Configuration page appears.
To activate or disable your service, complete the following tasks in the VeriSign
Identity Protection Configuration area:
a. Enable VeriSign Identity Protection: Check this box to enable VIP, or uncheck
the box to disable this feature.
b. Service Type: Choose the type of service that you acquired from VeriSign:
• VIP Pilot/Developer Test Drive: Choose this option if pilot tokens were
provided to you to test and understand VIP service during the initial stages
of deployment.
• VIP Production: Choose this option if you have purchased VeriSign service.
The service will use VIP production servers to authenticate your users.
c. Click Apply to save your settings, or click Reset to revert to the saved settings.
8
182