Volvo XC90 Owner's Manual page 61

Hide thumbs Also See for XC90:
Table of Contents

Advertisement

Gear and driving mode indicator – The
currently selected driving mode is dis-
played here. If you use the Geartronic
function on the automatic transmission,
the currently selected gear will be dis-
played.
Ambient temperature gauge – This dis-
play indicates the air temperature outside
your vehicle. A "snowflake" symbol in the
text window is displayed when the tem-
perature is in the range of 23 – 36 °F (–5 –
+2 °C). Please note that this symbol does
not indicate a fault with your vehicle. At
low speeds or when the vehicle is not
moving, the temperature readings may be
slightly higher than the actual ambient
temperature.
Clock/set button – Turn the button to set
the clock.
Fuel gauge – see page 288 for fuel tank
volume. When the warning light in the
gauge comes on, the vehicle should be
refueled as soon as possible. The trip
computer section (see page 76) pro-
vides more information on fuel level and
consumption.
Indicator and warning symbols – The indi-
1
cator and warning symbols
On certain engines, the symbol for low oil pressure is not used. Instead, a text warning is provided in the information display, see page 222.
1
you turn the ignition key to the driving
position (position II) before starting.
This shows that the symbols are functioning.
When the engine starts, all symbols go out. If
the engine is not started within 5 seconds, all
symbols except CHECK ENGINE and
go out. Certain symbols may not have their
functions illustrated, depending on the vehi-
cle's equipment. The symbol for the parking
brake goes out when the parking brake is
released.
light up when
02 Instruments and controls
Instrument panel
Warning/information symbol in center
of the instrument panel
This symbol shines as a red or
yellow light depending on the
nature of the information dis-
played.
Red symbol – Stop the vehicle as soon as
possible in a suitable location and read the
message shown in the text window. The sym-
bol and accompanying text will remain on
until the fault has been corrected.
Yellow symbol – Follow the instructions
shown in the text window. The text can be
erased by pressing the READ button (see
page 62), or will disappear automatically
after two minutes.
NOTE
TIME FOR REGULAR
When the message
SERVICE
is displayed, the text can be
erased and the yellow symbol light can be
turned off by pressing the READ button.
The text will disappear and the symbol
light will go out automatically after two
minutes.
02
59

Advertisement

Table of Contents
loading

Table of Contents