Volvo XC90 Owner's Manual page 108

04 Interior
Front seats
Automatic seat adjustment
To move the seat to the position in which you
left it:
1. Unlock the driver's door with the same
remote key (the one used to lock the
doors)
2. Open the driver's door within 2 minutes.
The driver's seat will automatically move to
the position in which you left it.
04
NOTE
•
The seat will move to this position
even if someone else has moved it to a
different seating position and locked
the vehicle with a different remote key.
•
This feature will work in the same way
with all of the remote key transmitters
(up to 3 ) that you use with your vehi-
cle.
•
This feature will not function if you lock
your vehicle with the key.
*
106
Option/accessory, for more information, see Introduction.
WARNING
•
Because the driver's seat can be
adjusted with the ignition off, children
should never be left unattended in the
vehicle.
•
Movement of the seat can be STOP-
PED at any time by pressing any but-
ton on the power seat control panel.
•
Do not adjust the seat while driving.
•
The seat should be adjusted so that
the brake pedal can be depressed
fully. In addition, position the seat as
far rearward as comfort and control
allow.
•
The seat rails on the floor must not be
obstructed in any way when the seat is
in motion.
Programming the memory
Three different seating and door mirror posi-
tions can be stored in the driver seat's mem-
ory.
The following example explains how button 1
can be programmed. Buttons 2 and 3 can be
programmed in the same way.
To program (store) a seat position in button 1:
1. Move the seat to the desired position
using the seat adjustment controls (see
page 104).
2. Press and hold down the MEM (memory)
button.