Jenn-Air SCE30600 Use And Care Manual page 18

To set oven on Bake or Convect Bake or Convect Roast
1. Place oven racks on proper rack positions.(See p. 19.)
2. Touch Bake Pad or Convect Bake Pad or Convect Roast Pad.
Indicator Words BAKE or CONV BAKE or CONV ROAST will flash and three
dashes will be shown,
Note: If more than five seconds elapse between touching a pad and touching a
numberpad, Display will return to previous Display.
3. Touch the appropriate number pads for desired oven temperature.
Allowabletemperaturerangeis 100°to 550°F. Afterfive secondstheoven will begin
to preheat. The IndicatorWords ON, PREHEAT,and either BAKE or CONV BAKE
or CONV ROAST will appear in the Display. The temperatureshown will be 100°
or the oven temperature whichever is higher.
Example: If at 10 o'clock you set the oven for 350° for conveet baking, after five
seconds the Display will show:
During the preheat,the Displaywill show a risein 5° increments until programmed
temperatureis reached. When the oven is preheated, the oven will chime, the ON
and PREHEAT Indicator Words willgo off, and programmedoven temperaturewill
be displayed.
Note: Oven will preheatfor approximately7 to 11 minutes.
Important: Whenever ON appears in the Display, the oven is heating.
To recall temperature set during preheat: Touch the appropriate Bake or
Convect Bake Pad or Convect Roast Pad. Temperaturewill be briefly displayed,
then will automatically return to on-going program.
To changetemperature set: TouchappropriateBake Pador Convect Bake Pad
or Convect Roast Pad and the appropriatenumber pads for the new desired
temperature.
Note: If youare loweringthetemperaturebelowthe current oventemperature, t he
word PREHEATand ON will appear briefly in the Displayand the preheatchime will
sound. Then, the Displaywill show programmedtemperature and Indicator Word
BAKE or CONV BAKE or CONV ROAST only.
4. Touch Cancel Off Pad to turn oven off at end of baking. The oven will continue
operating until the Cancel Off Pad is touched.
18