Lexmark CS410 Series User Manual page 83

Understanding the printer menus
Use
Timeouts
Wait Timeout
Disabled
15–65535
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Error Recovery
Max Auto Reboots
1–20
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Page Protect
Off
On
Press Sleep Button
Do Nothing
Sleep
Hibernate
To
Set the amount of time the printer waits for additional data before
canceling a print job.
Notes:
•
40 seconds is the factory default setting.
• Wait Timeout is available only when the printer is using
PostScript emulation.
Set the printer to restart when an error occurs.
Note: Reboot always is the factory default setting.
Determine the number of automatic reboots the printer can
perform.
Notes:
•
2 is the factory default setting.
•
If the printer reaches the maximum number of reboots within
a certain amount of time, the printer does not continue to
reboot, and the error message appears on the display.
Let the printer automatically continue printing from certain offline
situations when these are not resolved within the specified time
period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Notes:
•
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the pages
is needed for other printer tasks.
• On sets the printer to always reprint jammed pages.
•
Off sets the printer to never reprint jammed pages.
Successfully print a page that may not have printed otherwise.
Notes:
•
Off is the factory default setting. This prints a partial page
when there is not enough memory to print the whole page.
•
On sets the printer to print the entire page.
Determine how the printer, while in idle state, reacts to a short press
of the Sleep button.
Note: Sleep is the factory default setting.
83