Attaching Cables; Setting Up The Printer Software; Installing The Printer - Lexmark CS410 Series User Manual

Additional printer setup
Note: When the printer software and any hardware options are installed, you may need to manually add the options
in the printer driver to make them available for print jobs. For more information, see
the print driver" on page

Attaching cables

Connect the printer to the computer using a USB cable or to the network using an Ethernet cable.
Make sure to match the following:
• The USB symbol on the cable with the USB symbol on the printer
•
The appropriate Ethernet cable to the Ethernet port
Warning—Potential Damage: Do not touch the USB cable, any wireless network adapter, or the printer in the area
shown while actively printing. A loss of data or a malfunction can occur.
Use the
1 USB printer port
2 Ethernet port
3 USB port
4 Printer power cord socket Connect the printer to a properly grounded electrical outlet.

Setting up the printer software

Installing the printer

1
Obtain a copy of the software installer package.
2
Run the installer, and then follow the instructions on the computer screen.
3
For Macintosh users, add the printer.
Note: Obtain the printer IP address from the TCP/IP section in the Network/Ports menu.
26.
2
1
To
Connect the printer to a computer.
Connect the printer to a network.
Attach an optional wireless network adapter.
"Adding available options in
3
4
25