Central Legrest - Invacare rea Bellis User Manual

1.
6QQNU  OO #NNGP -G[
2.
6QQNU  OO #NNGP -G[
1.
A
2/1.
B
14
FOOTPLATES/CALF PADS
A
B
D

CENTRAL LEGREST

(NOT FOR REA™ BELLIS™ 150)
1. Angle-adjustable footplates
Adjust the angle and the depth by loosening the
screw (A) at the footplate attachment with a 5
mm Allen key. Adjust the footplate to the correct
position and retighten the screw.
Do not place anything on the footplate when
the screw is loose.
Other pin positions can be used if there is
a risk that the user could injure themselves,
just adjust the footplate to a more suitable
position,
C
2. Calf pads
The calf pads can be fitted in four different depth
positions. Swing the pad forwards. Unscrew screw
(B) using a 5 mm Allen key. Remove the large nut
(C) on the reverse side and place it in the other
attachment hole. Move the calf pad to the new
position and secure it into place with the screw.
The height of the calf pads can easily be adjusted
using the handwheel (D).
1. Adjust to the appropriate leg angle using knob
(A).
When adjusting the angle of the central legrest,
loosen the adjustment knob with one hand and
hold the foot plate with the other hand to avoid
trapping yours or anyone else's fingers etc.
When the seat is tilted forwards on a chair
with a long legrest length and low seat height,
there is a risk of the legrest hitting the floor
and causing damage.
2. You can adjust the height of the legrest in the fol-
NQYKPI VYQ YC[U
Alternative 1:
Loosen the Allen screw (B) on the front of the
telescopic tube, place the legrest in the desired
position and secure it into place using the Allen
screw.
®
REA BELLIS