Central Footplate; Central Legrest - Invacare Rea Bellis Manual

A
B
C
®
REA BELLIS

CENTRAL LEGREST

1. Adjust to the appropriate leg angle using knob
(A).
When adjusting the angle of the central
!
legrest, loosen the adjustment knob with one
hand and hold the foot plate with the other
hand to avoid trapping your or anyone else's
fingers etc.
When the seat is tilted forwards on a chair
!
with a long legrest length and low seat height,
there is a risk of the legrest hitting the floor
and causing damage.
2. You can adjust the height of the legrest in
the following two ways:
Alternative 1: Loosen the Allen screw (B) on the
front of the telescopic tube, place the legrest in
the desired position and secure it into place using
the Allen screw.
Alternative 2: Loosen the Allen screw (C) by
the legrest attachment as shown in the diagram.
Adjust to the desired height and then retighten
the screw.
11