Backrest - Invacare rea Bellis User Manual

1.
A
2.
B
3.
16
A

BACKREST

Backrest plate
1. You can easily adjust the backrest plate (+ 10 cm)
by loosening the two upper screws (A) with a
5-mm Allen key. Set at the required height and
re-tighten.
2. The upper section has two height levels and is
as well removable,(for lower backrest cushions).
Loose screws (B) with a 5-mm Allen key and raise
it to its heighest position. For removal, remove the
screws (B). Then put the neckrest attachment back
in place and re-tighten the screws (B).
Tension adjustable
3. For raising the height (+12,5cm), loose screw (A)
and lift the backrest frame up.
®
(Not for Rea™ Bellis™ 150)
®
REA BELLIS