NETGEAR D6100 User Manual page 96

AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100
5. Select ADVANCED > Advanced Setup > Wireless Access Point.
6. Select the Enable Access Point Mode check box.
The screen adjusts.
7. Scroll down and select the radio button for the IP address setting that you want to use:
• Get dynamically from existing router. The other router on the network assigns an
IP address to the modem router while the modem router functions in access point
mode.
• Enable fixed IP settings on this device (not recommended). Use this setting if you
want to manually assign a specific IP address to the modem router while it functions
in Access Point Mode. Using this option effectively requires advanced network
experience.
Note: To avoid interference with other routers or gateways on your network,
NETGEAR recommends that you use different WiFi settings on each
router. You can also turn off the WiFi radio on the other router or
gateway and use the modem router only for WiFi client access.
8. Click the Apply button.
The IP address of the modem router changes, and you are disconnected.
9. To reconnect, close and restart your browser and type http://wwwrouterlogin.net.
Manage the WiFi Network Settings
96