NETGEAR D6100 User Manual page 186

AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100
7. Below the Service Table (which is empty if you did not add any custom services or
applications), click the Add Custom Service button.
8. Specify a new outbound rule as described in the following table.
Field Description
Service Type/User Enter the name of the custom service or application.
Defined
Protocol Select the protocol (TCP or UDP) that is associated with the service or application. If
you are unsure, select TCP/UDP.
Starting Port Enter the start port for the service or application.
Ending Port If the service or application uses a range of ports, enter the end port for the range. If
the service or application uses a single port, repeat the port number that you entered
in the Starting Port field.
9. Click the Add button.
The custom service or application is added to the Service Table on the Firewall Rules
screen. You can now use the service or application in an outbound firewall rule (see
an Outbound Firewall Rule
Manage Firewall Rules, Port Forwarding, and Port Triggering
on page 179).
186
Add