Use Wps With The Pin Method - NETGEAR D6100 User Manual

AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100
For two minutes, the modem router attempts to find the WiFi device (that is, the client)
that you want to join the modem router's main WiFi network.
During this time, the WiFi LED on the front panel of the modem router blinks blue.
8. Within two minutes, go to the WiFi device and press its WPS button to join the modem
router's main WiFi network without entering a password.
After the modem router establishes a WPS connection, the WiFi LED lights solid blue and
the Add WPS Client screen displays a confirmation message.
9. To verify that the WiFi device is connected to the modem router's main WiFi network, select
BASIC > Attached Device.
The WiFi device displays onscreen.

Use WPS with the PIN Method

To use the PIN method to connect a WiFi device to the modem router's WiFi network, you
must know the PIN of the WiFi device that you are trying to connect.

To let a WiFi device join the modem router's WiFi network using WPS with the PIN
method:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > WPS Wizard.
The screen displays a description of the WPS method.
6. Click the Next button.
The Add WPS Client screen adjusts.
The Push Button (recommended) radio button is selected by default.
7. Select the PIN Number radio button.
Manage the WiFi Network Settings
83