Change The Wan Connection Preference - NETGEAR D6100 User Manual

AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100
• ADSL2. Legacy version of ADSL2.
• ADSL2+. ADSL2+ provides the fastest downstream rates and can interoperate with
ADSL2 and ADSL (g.dmt).
7. Click the upper Apply button.
Your DSL mode changes are saved.
8. From the Multiplexing Method menu, select LLC-BASED or VC-BASED, as indicated by
your ISP.
9. For the VPI, enter a number between 0 and 255, as indicated by your ISP.
The default setting is 0.
10. For the VCI, enter a number between 32 and 65535, as indicated by your ISP.
The default setting is 38.
11. Click the lower Apply button.
Your PVC changes are saved.

Change the WAN Connection Preference

The modem router can auto-detect the type of WAN connection. However, you can also set
the WAN connection preference manually to either the ADSL port or the Ethernet WAN port.
Note: The modem router does not support load balancing over ADSL and
Ethernet WAN interfaces. Only one WAN interface (either the ADLS
port or the Ethernet WAN port) can be active at any time.

To change the WAN connection preference:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Setup > WAN Setup.
The WAN Setup screen displays.
Manage the WAN and LAN Network Settings
127