Unusual Conditions - Fuji Xerox DocuPrint C4350 User Manual

6.1.2

Unusual Conditions

If you think some trouble is occurring on the machine, check the machine status
again. If the problem still persists, proceed to"6.4 Poor Print Quality"(P.223) and
"6.5 List of Messages"(P.227) to take the appropriate action.
Never open or remove printer covers that are secured with screws
●
unless specifically instructed in the "User Guide." A high voltage com-
ponent can cause electric shock.
Do not try to alter the printer configuration, or modify any parts. An
●
unauthorized modification can cause smoke or fire.
Information on unsuccessful print processing is saved in the [Job history report]. If a print job is not
processed, print the [Job History Report] to check the print processing status. The print data may be
discarded if not processed correctly.
For how to print the [Job History Report], refer to"5.6 Printing Report/List"(P.152).
Symptom
Power is not switched
on.
Cause
Is the power switch turned off?
Is the printer not plugged in?
Is the power voltage correct?
6.1 Type of Problem
Action
Switch on the printer.
"3.2 Switching on/off the Printer"(P.36)
Turn the power switch off, and connect
the power cord securely. Then, switch
on the printer.
"3.2 Switching on/off the Printer"(P.36)
Check that the power supply is 100 V
and 15 A, and that the power capacity
corresponding to the maximum power
consumption of this printer (1500 W) is
secured.
"Safety Notes"(P.xiii)
6
189