Fuji Xerox DocuPrint C4350 User Manual page 185

Error message
016-711 (Out of PCL6
Memory)
016-702 (Out of Page Buffer)
016-721
Cause and Action
Cause: PCL6 print data cannot be processed because of
the necessary memory is insufficient.
Action: If the <Print Mode> is <Super Fine>, change the
setting to <High Quality> and retry. If the problem
is still not corrected, retry after changing the setting
to <Standard>.
4.10 Setting Print Mode (P. 79)
Cause: PCL6 print data cannot be processed because of
insufficient memory.
Action: Take one of the following actions:
If the <Print Mode> is set to <Super Fine>,
●
change it to <High Quality>.
If the problem is still not corrected, change to
<Standard>
Use the page print mode.
●
Increase the print page buffer capacity.
●
Increase the memory.
●
For information about <Print Mode>, refer to "4.10
Setting Print Modes" (P.76). For information about the
page print mode, refer to the on-line help of the print
driver. For information about the print page buffer,
refer to "1.5 About Allocation of Memories" (P.20).
Cause: An error occurred during print processing because
of the following reasons:
(1) Although [Paper Type Priority] of <Print Set-
tings> in the Common Menu is set to <Off> for
all paper types, print is instructed with the Auto-
matic Tray Selection specified.
(2) Wrong ESC/P command
Action: For information about (1), set [Paper Type Prior-
ity] to other than <Off> for at least one paper type
when printing with the Automatic Tray Selection
specified.
For information about (2), check the print data
Paper Priority (P. 293)
5.6 Printing Report/List
5
157