Port Setting - Panasonic KX-TVS751 Installation Manual

4.5.6 Ikrdware Settings
Parameter
Value Range
(default)
Stop Bit Length 1. I bit
2. 2 bits
(1)
4.5.6.2 Port Setting
Description/Function
Specifies the number of bits used to signify the
end of the byte.
r
Reference
Data
Terminal or
Printer
Connection
p.2-15
The VPS must be connected to a PBX telephone line port before system start up.
TVS 75 - two ports
TVS 100 - a maximum of four ports
System Administration Top Menu 4 1 + 6 -+ 2
Program - Hardware - Port Setting Menu
1. Port 1
2. Port 2
3. Port 3
4. Port 4
SELECT ITEM AND PRESS RETURN-KEY
Setting Menu
System Administration Top Menu + 1 + 6 + 2 + 1
Program - Hardware - Port Setting - Port 1 Menu
Flash Time ----------
--- : 300
CPC Signal -------
----- : None
Disconnect Time -
--
: 2
Dial Mode --~
- : DTMF
Flash Time
Value Range
(default)
1. 100 msec
2. 300 msec
3.600 msec
4.900 msec
(600)
Description/Function
Reference
Specifies the length of time that the hookswitch
PBX Type
must be pressed before the PBX recognizes it as a p.4-79
flash hook signal. See the manuals of PBX to
determine the correct value.
System Administrator
4-77