ProForm 485 Crosswalk User Manual page 12

12. See the lower drawing. Position the Uprights
(53, 54) so that the Frame (51) is centered be-
tween them.
Firmly tighten the two M10 x 60mm Patch Bolts
(1) and the four M10 x 75mm Bolts (2) (only one
side is shown). Be careful not to overtighten
the M10 x 60mm Patch Bolts. Raise the
Uprights (53, 54).
13. Attach the Left Crosswalk Arm (117) and a
Plastic Spacer (119) to the Left Upright (53) with
two 1/4" x 3" Bolts (111) and two 1/4" Flat
Washers (114). Make sure that the Left
Crosswalk Arm is on the indicated side of
the Console (91).
Attach the Right Crosswalk Arm (not shown)
in the same way. Be careful not to pinch the
wires in the Right Upright (not shown).
12
54
13
91
114
111
12
1
53, 54
Top View
51
117
53
119
2
53