Ricoh MP 401 spf User Manual page 28

2. Getting Started
1. ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
2. ADF cover
Open this cover to remove originals jammed in the ADF.
3. ADF cover open lever
Pull this lever to open the ADF cover.
4. Input tray for the ADF
Place stacks of originals here.
5. Extender for the ADF tray
Extend this when placing paper longer than A4 in the input tray for ADF.
6. Exposure glass
Place originals face down here.
7. Cover for the exposure glass
Open this cover to place originals on the exposure glass.
8. Output tray for the ADF
Originals scanned with the ADF are output here.
9. Stop fence for the ADF
Pull out this fence to prevent originals from falling off.
10. Control panel
See page 31 "Guide to the Names and Functions of the Machine's Control Panel".
11. Ventilation holes
Prevent overheating.
12. Standard tray
Copied/printed paper and fax messages are delivered here.
13. Front cover open button
Push this button to open the front cover.
14. Memory cover
The memory unit and HDD are installed inside. Don't open the memory cover.
15. Front cover
Open to access the inside of the machine and remove jammed paper.
Open here to replace the toner cartridge.
16. Lower paper trays (option)
Load paper here.
For details, see page 30 "Guide to Functions of the Machine's Options".
26