7.
Enter the vertical size using the number keys, and then press [ ].
8.
Press [Horizontal].
9.
Enter the horizontal size using the number keys, and then press [ ].
10.
Press [OK] twice.
11.
Press the [User Tools/Counter] key.
Specifying thick paper or OHP transparencies for paper type using the control panel
• Usually only one side of OHP transparencies can be used for printing. Be sure to load them with the
print side up.
• When printing onto OHP transparencies, remove printed sheets one by one.
1.
Press the [User Tools/Counter] key.
2.
Press [Tray Paper Settings].
3.
Press [ ].
4.
Press [Printer Bypass Paper Size], and then specify the paper size.
5.
Press [OK].
6.
Press [Paper Type: Bypass Tray].
7.
Press [Paper Type].
CXC251
Loading Paper into the Bypass Tray
135