4. Fax
Transmitting while Checking Connection to
Destination (Immediate Transmission)
Using Immediate Transmission, you can send documents while checking the connection to the
destination.
You can specify fax or IP-Fax destinations.
If you specify Internet Fax, e-mail, folder destinations, and group or multiple destinations, the
transmission mode is automatically switched to Memory Transmission.
• It is recommended that you call the receivers and confirm with them when sending important
documents.
1.
Press the [Home] key on the top left of the control panel, and press the [Facsimile] icon on
the [Home] screen.
2.
Make sure "Ready" appears on the screen.
3.
Press [Immed. TX].
4.
Place the original into the ADF.
5.
Select the scan settings you require.
6.
Specify a destination.
If you make a mistake, press the [Clear] key, and then enter again.
7.
Press the [Start] key.
80
CXC252