LABEL
Port
This is the Ethernet or wireless port.
Status
This shows the port speed and duplex setting if you are using Ethernet encapsulation
for the Ethernet port.
This shows the transmission speed only for wireless port.
TxPkts
This is the number of transmitted packets on this port.
RxPkts
This is the number of received packets on this port.
Collisions
This is the number of collisions on this port.
Tx B/s
This shows the transmission speed in bytes per second on this port.
Rx B/s
This shows the reception speed in bytes per second on this port.
Up Time
This is total amount of time the line has been up.
Bridge Link #
This is the index number of the bridge connection.
Active
This shows whether the bridge connection is activated or not.
Remote Bridge
This is the MAC address of the peer device in bridge mode.
MAC Address
Status
This shows the current status of the bridge connection which can be Up or Down.
TxPkts
This is the number of transmitted packets on the wireless bridge.
RxPkts
This is the number of received packets on the wireless bridge.
System Up Time
This is the total time the ZyAIR has been on.
Poll Interval(s)
Enter the time interval for refreshing statistics.
Set Interval
Click this button to apply the new poll interval you entered above.
Stop
Click this button to stop refreshing statistics.
10.3 Association List
View the wireless stations that are currently associated to the ZyAIR in the Association List screen.
Click MAINTENANCE and then the Association List tab to display the screen as shown next.
Maintenance
Table 10-2 System Status: Show Statistics
ZyAIR Access Point Series User's Guide
DESCRIPTION
10-3