FIELD
Active
To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER].
Filter Action
Define the filter action for the list of MAC addresses in the MAC address filter table.
To deny access to the ZyAIR, press [SPACE BAR] to select Deny Association and press
[ENTER]. MAC addresses not listed will be allowed to access the router.
The default action, Allowed Association, permits association with the ZyAIR. MAC
addresses not listed will be denied access to the router.
MAC Address Filter
1..32 Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are
allowed or denied access to the ZyAIR in these address fields.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
13.3.2 Configuring Roaming
Enable the roaming feature if you have two or more ZyAIRs on the same subnet. Follow the steps below to
allow roaming on your ZyAIR.
Step 1.
From the main menu, enter 3 to display Menu 3 – LAN Setup.
Step 2.
Enter 5 to display Menu 3.5 – Wireless LAN Setup.
LAN Setup
Table 13-3 Menu 3.5.1 WLAN MAC Address Filter
ZyAIR Access Point Series User's Guide
DESCRIPTION
13-7