EQUIPMENT PACKAGING
Table 4: GXP2120/GXP2110/GXP2100/GXP14xx EQUIPMENT PACKAGING
Main Case
Handset
Phone Cord
Power Adaptor
Ethernet Cable
Phone Stand
Wall Mount Spacers
Quick Start Guide
CONNECTING YOUR PHONE
Handset Port
Headset Port
LAN Port
PC Port
EXT Port
Power Jack
To set up the GXP2120/GXP2110/GXP2100/GXP14xx, follow the steps below:
1. Attach the phone stand or wall mount to the back of the phone where there are slots;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
4. Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used in step 3 (not applicable to GXP1400), this step could be
skipped;
FIRMWARE VERSION 1.0.5.58
INSTALLATION
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Table 5: GXP2120/GXP2110/GXP2100/GXP14xx CONNECTORS
RJ9
2.5mm and RJ9 for GXP2120/GXP2110/GXP2100/1450; RJ9 for GXP140x
10/100Mbps RJ-45 port connecting to Ethernet;
Integrated PoE for GXP2120/GXP2110/GXP2100/GXP1450/GXP1405
10/100Mbps RJ-45 port for PC connection
Extension module connection port for GXP2120/GXP2110
5V DC Power connector port
GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL
1
1
1
1
1
2 for GXP2120/GXP2110/GXP2100/1450;
1 for GXP140x
2
1
Page 16 of 80